EQUIPMENTTabber&StringerSTS2400 Dual Lines

SGT3000 Full Automatic Dual Lines

Release time:2018-05-28 Reading times :0 times


Product Advantage:


1. CCD visual defect detection and positioning.

2. High-speed four axis mechanical hand solar cell classification handling and positioning.

3. Accurate and quantitative spraying of flux.

4. Original flexible ribbon pressing mechanism.

5. Infrared heating, subsection soldering, closed loop control of soldering temperature and power, temperature raise smoothly and small heat shock, effectively reduce the solar cell breakage rate.

6. The battery string detection system can be used to detect the dislocation of the main grid and the position of bus bar(Optional).



Equipment performance :

1. External dimension: 6000mm×1450mm×2100mm;

2.Transmission mode: All Inclusive hemp belt delivery assembly, servo motor positioning;

3. Max Capacity:  2300 pcs/hour for Whole cell, 2500 pcs/hour for half cell .

4. Breakage rate :0.1 (Positive A Class)

5. Solar cell dimension:  156mm×156mm, 156.75*156.75mm, 156*78mm

6. Thickness of Solar Cell :  0.16-0.3mm

7. Max String Soldering length :  2000mm

8. Ribbon specification:  0.15-0.3mm thickness, 0.7-2mm width (Can customized)

9. Flux adding method :  Spray

10. Soldering method :  IR heating

11. Bus-bar Quantity: 3BB, 4BB, 5BB, 6BB(Fixture switching, can customized)

12. Power supply: 3-phase380V, 50-60Hz(requires firmly grounded);

13. Input compressed air pressure: 0.6-0.8MPa;

14. Input Compressed air flow: 450L/min;

15. Power consumption: 28kW;

16.  Net Weight :  3500KGS


COPYRIGHT @2015 WUHAN SUNIC PHOTOELECTRIC EQUIPMENT MANUFACTURE CO., LTD All RIGHTS RESERVED