Home - ARGUS SOLAR

Click Here

SPECIALIST IN PV MODULE PRODUCTION PROCESS

0 +

YEARS OF EXPERIENCE

0 m2

3 major production factories

0 +

CUSTOMERS WORLDWIDE

+ 0 GW

OF PRODUCTION INSTALLED

At every stage of the production process, we offers optimal solutions for automation and quality, accompanied by comprehensive training support.

3 major production factories, Factory Area 130,000m2.

Being initially established as a module manufacturer, our process for PV module production lines is tailored from the perspective of module manufacturers.

We have established over 10 domestic offices and export our products to over 50 countries and regions worldwide. With our dedication to quality and innovation, we serve more than 500 satisfied customers.

We’re continuously improving our technology and innovating to ensure our production solutions stay ahead of market trends.

Argus Solar PV Module Automation Production Line

ARGUS Solar Production Line

Tabber & Stringer Series

SGT-2000 Fully Automatic Solar Cell Tabber & Stringer

Weight	4800 kg
Dimensions	700 × 165 × 220 cm
Max capacity	1,500 cells / h
Cell size	156-166( whole piece 1/2、 1/3) 182-230 (1/2、 1/3)
Cell thickness	0.16-0.3mm
Cell spacing	-0.7mm, 1.0-5.0mm
Cell string spacing	10-40mm
Max string welding length	≤2250mm
Welding tape specifications	Flat welding strip width 0.5-3mm ,thickness 0.18-0.32mm
Fragment rate	≤3 ‰ (positive grade-A film)
Fluid agent application method	Welding belt infiltration
Welding method	infrared bonding
Discharge form	Manual discharge or automatic docking Lay-up machine

Thin-film Solar Cell Production Line

Chalcogenide Laser Scribing Etching Machine (P1, P2, P3 scribing and etching; P4 edge cleaning)

Equipment model	SE-P(X)
Effective working width	500mm×500mm (on request)
Maximum running speed	2000mm/s(P1-P3)，200mm/s(P4)
Repeatable positioning accuracy	±10μm/500mm
Straightness of marking lines	±10μm/500mm
Film line width (P1-P3)	30~60μm
Clear edge width (P4)	5~20mm
Total width of three line edge	300~500μm
Laser type	Selected according to process requirements

Test Sorting Series

On-line EL Appearance Inspection Machine

Weight	900 kg
Dimensions	271 × 213 × 132 cm
Equipment model	SELA-V20.D5
Sample applied	crystalline silicon solar module
Valid testing area	2200mm×1200mm
Design capacity	150pcs/hr
Applied	before laminating/after laminating
Resolution ratio	Infrared 500W*12/visible 200Wx12
DC power	Programmable power
Current range	0~15A Continuous adjusted
Voltage range	0~80V Continuous adjusted
Image storage	Manual / automatic scanning bar code, with numbered name as file name to keep.
Motion control unit	Adopts touch screen to communicate with PLC, display the current state and monitor the process in real-time.
Control interface	Chinese and English dialog interface, automatic controlling constant current on&off.
Monitor	4K super definition display on large screen
Software performance	Graphic magnification display function, display tiny features,SQL database store picture
Voltage	AC single phrase 220V±10%，50Hz/60Hz ±10%
Power consumption	3.5 KW
Compressed air	0.6-0.8MPa
Equipment size	2710x2130x1320mm
Equipment weight	900kg

Laminating Machine Series

Fully Automatic Four-layer Double-cavity PV Module Lamination Machine

Equipment model	SLM-5827
Dimension	26.4X4.68X3.75m
Total equipment weight(approx.)	142 T
Effective lamination area	5800×2700mm
Module specification	2500×1350( 210) 2500×1130(182)
Number of modules/Placement	4 ▍▍▍▍ 4 ▍▍▍▍
Working hours	22 hours/day, 330 days/year
N type 210-66 version;690W	480 MW/year (single glass) 400 MW/year (double glasses)
N type 182-72 version;580W	405 MW/year (single glass) 337 MW/year (double glasses)
Lamination cavity height	30mm – 45mm
Heating platform、method	Irflatness 200um per square meter , oil heating or electric heating
Temperature uniformity	±1.5℃
Temperature range	Room temperature ~180℃
Upper cover stroke	Work: 100mm
Heating plate thickness	Oil heating ≥ 60mm, electric heating ≥ 45mm
Transfer speed	3.5~15m / min is continuously adjustable
A cavity vacuuming rate、 B cavity vacuuming rate	600L/S、140L/S
Temperature control accurac	±1℃
Operating vacuum level	40～100Pa
Utilization rate	≥99%

Scribing Machine Series

2000 Automatic laser scribing machine (SC-N 2000V22A (1/2 lobe)

Weight	500 kg
Dimensions	106 × 90 × 150 cm
Cell specification	156×156~210x210mm(WidthxLength)
Scribing capacity	1800 full slices/hour (one cut per slice)
Positioning method	mechanical positioning
Breakage rate	≤0.2%
Scribing accuracy	±0.1mm
Scribing speed	Max 600mm/s
Marking width	≤40μm
Laser	Fiber laser; Wavelength: 1064nm
Average power	30W

Production Line Equipments

Automatic Lay-up Machine/Robot Lay-up Machine

Equipment model	SGL-2500 / SJPG-300V18/ER10-2000
Applied module specification	2500x1400mm
Lay-up accuracy	±0.5mm
Breakage rate	≤1‰(Positive A class)
Beat time	12 seconds/string / 6 seconds/string
Maximum string length	2000mm / 2300mm
Power	AC380V，50Hz，5KW
Gas source	0.6-0.8MPa，200L/min

Turnkey Solutions

Discover our Turnkey Lines

ARGUS FOR THE PHOTOVOLTAIC INDUSTRY

Since 1998, ARGUS SOLAR has been involved in research, design, and construction of turnkey machines and lines for PV production. All services are performed internally, with the advantage of one-stop contact from order placement to after-sales support.Our valueble experience enables us to offer a wide range of services beyond the manufacturing of PV modules or PV production lines, but including a series of activities which guarantee complete professional and punctual assistance ."

MORE SPACE, HIGHER THROUGHPUT

Being initially established as a module manufacturer, our process for PV module production lines is tailored from the perspective of module manufacturers. At every stage of the production process, we offers optimal solutions for automation and quality, accompanied by comprehensive training support.

SPECIALIST IN PV MODULE PRODUCTION PROCESS

Argus Solar PV Module Automation Production Line

Thin-film Solar Cell Production Line

Test Sorting Series

Tabber & Stringer Series

Scribing Machine Series

PV Module Automation Production Line

Production Line Equipments

Laminating Machine Series

Bezel Marking Machine Series

ARGUS Solar Production Line

ARGUS PV Production Line Equipments

Turnkey Solutions

ARGUS FOR THE PHOTOVOLTAIC INDUSTRY

MORE SPACE, HIGHER THROUGHPUT

Being initially established as a module manufacturer, our process for PV module production lines is tailored from the perspective of module manufacturers. At every stage of the production process, we offers optimal solutions for automation and quality, accompanied by comprehensive training support.

Argus Solar Exhibition

Company

Production

Contact US

SPECIALIST IN PV MODULE PRODUCTION PROCESS

Argus Solar PV Module Automation Production Line

Thin-film Solar Cell Production Line

Test Sorting Series

Tabber & Stringer Series

Scribing Machine Series

PV Module Automation Production Line

Production Line Equipments

Laminating Machine Series

Bezel Marking Machine Series

ARGUS Solar Production Line

ARGUS PV Production Line Equipments

Turnkey Solutions

ARGUS FOR THE PHOTOVOLTAIC INDUSTRY

MORE SPACE, HIGHER THROUGHPUT

Being initially established as a module manufacturer, our process for PV module production lines is tailored from the perspective of module manufacturers. At every stage of the production process, we offers optimal solutions for automation and quality, accompanied by comprehensive training support.

Argus Solar Exhibition

GET A QUOTE