FIRST LAYER EVA CUTTING&LAYUP MACHINE
| Product Name & Code | FIRST LAYER EVA CUTTING & LAYUP MACHINE |
|---|---|
| Dimensions | 5780*2230*1800 (customizable) |
| Weight | 2500KG |
| Power Supply | 3 Phase 5 Lines,380V 50Hz (3×4mm2+2×2.5mm2) copper wire |
| Installed Power | 8 KW |
| Average Power | 4KW |
| Air Consumption | 0.6~0.8 MPa;100L/min |
| Ambient | -10_60℃ Relative Humidity＜90％； Altitude＜2500m |
| Ventilation | None |
| Cycle time | ≤20S |
| Control System | Mitsubishi |
| Control Board | FX3U-48M |
| Uptime | 99% |
| Feeding Method | Electro-hydraulic lift,enabling single-person loading. |
| Material Reception Method | Equipped with audible and visual alarms for alerts and faults, complemented by a touch screen display for error indication |
| Cutting Method | Upper and lower knife cutting type |
| Punching Method | Pneumatic die-cutting |
| Punching Size | can correspond to full-size straight openings; |
| Punching Position | 1) The position of the middle opening is fixed |
| Punching dot | Punching size: the deviation does not exceed the standard value ±1 mm. |
| Cutting Width Range | 1450mm |
| Cutting/ Layup Accuracy | 1. Cutting size requirements: EVA ± 2mm, diagonal error 1.5mm |
| Maximum Material Roll Size | The roll diameter is 400-850mm |
| Module Size | Suitable for 156.75-210mm large cell module |
| Panel Size Changing Time | ≤5min |