SUNIC
| Equipment model | SE-P(X) |
|---|---|
| Effective working width | 500mm×500mm (on request) |
| Maximum running speed | 2000mm/s(P1-P3)，200mm/s(P4) |
| Repeatable positioning accuracy | ±10μm/500mm |
| Straightness of marking lines | ±10μm/500mm |
| Film line width (P1-P3) | 30~60μm |
| Clear edge width (P4) | 5~20mm |
| Total width of three line edge | 300~500μm |
| Laser type | Selected according to process requirements |
| Equipment model | SE-P(1-5) |
|---|---|
| Effective working width | 1400mmx1000mm (on request) |
| Repeatable positioning accuracy | ±10μm/1000mm |
| Straightness of marking lines | ±10μm/1000mm |
| Minimum film line width | 30~60μm |
| Clear edge width (P4) | 5~20mm |
| Total width of three line edge | 300~500μm |
| Equipment model | SGL-2500 / SJPG-300V18/ER10-2000 |
|---|---|
| Applied module specification | 2500x1400mm |
| Lay-up accuracy | ±0.5mm |
| Breakage rate | ≤1‰(Positive A class) |
| Beat time | 12 seconds/string / 6 seconds/string |
| Maximum string length | 2000mm / 2300mm |
| Power | AC380V，50Hz，5KW |
| Gas source | 0.6-0.8MPa，200L/min |
| Weight | 200 kg |
|---|---|
| Dimensions | 80 × 60 × 120 cm |
| Equipment model | SM-E10 |
| Marking pattern size | ≤200mm x 200mm |
| Marking position | 1pc |
| Marking accuracy at specified position | x: ±2mm; y: ±0.5mm; angle:±0.5° |
| Module positioning method | Pneumatic cylinder/servo Mechanical positioning |
| Machine tempo | Machine tempo |
| Transfer line height | 950±30mm |
| Inflow and outflow of module | A: long in/long out; B: short in/short out |
| Laser parameters | Pulsed fibre laser; wavelength: 1064nm |
| Camera | HD industrial camera |
| Equipment size | L×W×H: 800×600×1200mm (without dust extractor) |
| Equipment weight | 0.2 ton (without dust extractor) |
| Weight | 1800 kg |
|---|---|
| Dimensions | 290 × 230 × 210 cm |
| Equipment model | SM-C10 |
| Module version size range | Length: 1400-2550mm, Width: 900-1650mm, Height: 25-50mm |
| Marking pattern size | ≤200mm×200mm |
| Marking position | 3pcs (C-side 1 zone*1; C-side 2 zone*1; B-side 1 zone*1) |
| Marking accuracy at specified position | x: ±2mm; y: ±0.5mm; angle:±0.5° |
| Machine tempo | ≤22 seconds |
| Module positioning method | Pneumatic cylinder/servo Mechanical positioning |
| Transfer line height | 950±30mm |
| Inflow and outflow of components | A: long in-long out; B: short in-long out |
| Laser parameters | Pulsed fibre laser; wavelength: 1064nm |
| Camera | HD industrial camera |
| Equipment size | Length x width x height: 2900×2300×2100 mm (without extractor) |
| Equipment weight | 1.8t (without extractor) |
| Light Source Type | LED |
|---|---|
| Test Component Size | 1200mm x600mm, The size of the test component can be customized as required. |
| Spectral Matching Class | A+ |
| Time Instability Class | A+ |
| Uniformity Class | A+ |
| Spectral Ranges | 300nm ～ 1200nm |
| Output Optical Power | 0.1 ～ 140mW/cm2 (0.1～1.4 SUN) (Adjustable) |
| Flashing Time | Transient、 Steady State |